TM 9-2350-238-34-2
2-20. MAINTENANCE OF WINCH LEVEL WIND AND CONNECTING LINK SLIDE
(CONT),
ADJUSTMENT
NOTE
remote control lever (7), and lower sleeve
The following adjustment must be
spacer (8) is tight against manual control
made at time of reassembly.
lever (9).
1 Remove three machine bolts (1), three flat
3 Back off self-locking nut (4) one-half turn.
washers (2), and level wind access cover
(3).
4 Tap underside of manual control lever (9)
to free lower sleeve spacer (8).
2 Tighten self-locking nut (4) until two
helical springs (5) are compressed and up-
per sleeve spacer (6) is tight against
2-28