TM 9-2350-238-34-25 Turn cable guide (10) until side of cableguide is perpendicular to axis of rigidconnecting link (11) within 0.030 in.(0.076 cm).6 Clamp cable guide (10) to level windhousing (12) and hold in position.7 Loosen three nuts (13) securing levelwind bracket (14) to level wind housing(12).8 Adjust level wind bracket (14) untilremote control lever (7) is centered inslot of level wind bracket (14).NOTELevel wind sensing push switches(15) may be loosened if necessary,9 Tighten three nuts (13) and unclampcable guide (10).10 Position level wind sensing push swit-ches (15) so they contact remote controllever (7), and then back off push swit-ches (15) one-half turn. Secure levelwind push switches (15) with mountingnuts (16).11 Install level wind access cover (3) andsecure with three flat washers (2) andthree machine bolts (1).12 After installation of level wind assemblyon vehicle, refer to TM 9-2350 -238-20-2for final adjustment.2-29
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business