TM 9-2350-256-20-1
0045 00
CORRECTIVE ACTION Continued
5.
Reconnect bulkhead to engine wiring harness and starter relay wiring harness to bulkhead. Remove
engine deck (see WP 0336 00). Disconnect bulkhead to engine bracket and rear fuel tank transmitter
wiring harness from engine disconnect. Place red lead of multimeter in socket B of wire 54 and black
lead to ground. Turn MASTER and ENGINE FUEL SHUTOFF switches on and check for voltage.
Turn MASTER and ENGINE FUEL SHUTOFF switches OFF. If voltage is present, repair/replace
wire 54 of engine wiring harness (see WP 0207 00 for dual voltage; 0208 00 for single voltage). If
voltage is not present, go to step 7.
6.
Disconnect wire 54 from fuel shutoff solenoid. Place red lead of multimeter in wire 54 and black lead
to ground. Turn MASTER and ENGINE FUEL SHUTOFF switches on and check for voltage. Turn
MASTER and ENGINE FUEL SHUTOFF switches OFF. If voltage is present, replace fuel shutoff
solenoid (see WP 0130 00). If voltage is not present, go to step 7.
0045 00-5
