TM 9-2350-256-20-1
0053 00
CORRECTIVE ACTION Continued
6.
Reconnect bulkhead to engine bracket and rear fuel tank transmitter wiring harness to bulkhead and
disconnect from engine disconnect. Place red lead of multimeter in socket D of wire 321 and black lead
to ground. Turn MASTER switch on and check for voltage. Turn MASTER switch OFF. If voltage is
present, go to step 7. If voltage is not present, repair/replace wire 321 of bulkhead to engine bracket
and rear fuel tank wiring harness (see WP 0222 00 for dual voltage; 0223 00 for single voltage).
7.
Reconnect bulkhead to engine bracket and rear fuel tank wiring harness to engine disconnect. Discon-
nect wire 321 from transmission oil pressure sending unit. Place red lead of multimeter on wire 321
and black lead to ground. Turn MASTER switch on and check for voltage. Turn MASTER switch
OFF. If voltage is present, replace transmission oil pressure sending unit (see WP 0168 00). If voltage
is not present, repair/replace wire 321 of engine wiring harness (see WP 0207 00 for dual voltage; 0208
00 for single voltage).
0053 00-5