TM 9-2350-256-20-1
0052 00
CORRECTIVE ACTION Continued
6.
Reconnect bulkhead to engine bracket and rear fuel tank wiring harness to bulkhead. Remove engine
deck (see WP 0336 00). Disconnect bulkhead to engine bracket and rear fuel tank wiring harness from
engine disconnect. Place red lead of multimeter in socket E of wire 324 and black lead to ground. Turn
MASTER switch on and check for voltage. Turn MASTER switch OFF. If voltage is present, go to
step 7. If voltage is not present, repair/replace wire 324 of bulkhead to engine bracket and rear fuel tank
wiring harness (see WP 0222 00 for dual voltage; 0223 00 for single voltage).
7.
Reconnect bulkhead to engine bracket and rear fuel tank wiring harness to engine disconnect. Discon-
nect wire 324 from transmission oil temperature sending unit. Place red lead of multimeter in wire 324
and black lead to ground. Turn MASTER switch on and check for voltage. Turn MASTER switch OFF.
If voltage is present, replace transmission oil temperature sending unit (see WP 0168 00). If voltage is
not present, repair/replace wire 324 of engine wiring harness (see WP 0207 00 for dual voltage; 0208
00 for single voltage).
END OF WORK PACKAGE
0052 00-5/6 blank
