TM 9-2350-256-20-1
0051 00
CORRECTIVE ACTION Continued
switch OFF. If voltage is present, go to step 9. If voltage is not present, repair/replace wire 627 of
bulkhead to engine bracket and rear fuel tank transmitter wiring harness (see WP 0222 00 for dual
voltage; 0223 00 for single voltage).
9.
Reconnect bulkhead to engine bracket and rear fuel tank transmitter wiring harness to engine discon-
nect. Disconnect wire 627 from governor solenoid. Place red lead of multimeter on wire 627 and
black lead to ground. Turn MASTER switch on, place POWER lever in the ON position, and check
for voltage. Turn MASTER switch and POWER lever OFF. If voltage is present, notify Direct Support
Maintenance. If voltage is not present, repair/replace wire 627 of engine wiring harness (see WP 0207
00 for dual voltage; 0208 00 for single voltage).
END OF WORK PACKAGE
0051 00-7/8 blank
