TM 9-2350-256-20-2
0368 00
Assembly
1.
Install ball bearing (6) into housing (3) making sure that bearing hole aligns with hole for lubrication fitting in housing.
Secure ball bearing with retaining ring (5).
NOTE
Seals (1 and 4) must be installed with rubber lips facing outward.
2.
Install seals (1 and 4) into housing (3).
3.
Install lubrication fitting (2) into housing (3).
4.
Lubricate in accordance with WP 0097 00.
Installation
1.
Install bearing unit housing assembly (see WP 0365 00).
NOTE
Follow-on maintenance: Install service brake linkages if removed (see WP 0365 00).
END OF WORK PACKAGE
0368 00-3/4 blank
