TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
LEVER ASSEMBLY MAINTENANCE
DISASSEMBLY, ASSEMBLY
INITIAL SETUP:
Tools and Special Tools
References
Tool kit, general mechanic's (item 59, WP 0490 00)
WP 0097 00
Materials/Parts
Equipment Condition
Seals (2) (item 241, WP 0491 00)
Lever assembly removed (see WP 0365 00)
Disassembly
1.
Remove lubrication fitting (1) from lever (2).
2.
Pry two seals (3) out of lever (2).
3.
Tap bearing (4) out of lever (2).
Assembly
1.
Install bearing (4) into lever (2) making sure that bearing hole aligns with hole for lubrication fitting in lever.
NOTE
Seals (3) must be installed with rubber lips facing outward.
2.
Install two seals (3) into lever (2).
3.
Install lubrication fitting (1) into lever (2).
4.
Lubricate in accordance with WP 0097 00.
NOTE
Follow-on maintenance: Install lever assembly (see WP 0365 00).
END OF WORK PACKAGE
0370 00-1/2 blank
