TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
LINKAGE ROLLER PLATES REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Lockwashers (6) (item 642, WP 0491 00)
Materials/Parts
Nuts (6) (item 761, WP 0491 00)
Bolts (8) (item 339, WP 0491 00)
Washers, flat (6) (item 540, WP 0491 00)
NOTE
Removal and installation procedures are the same for all three linkage roller plates.
Removal
1.
Remove eight bolts (1) and eight rollers (2) from linkage roller plate (3).
2.
Remove linkage roller plate (3) by removing two nuts (4), two lockwashers (5), and two flat washers (6).
Installation
1.
Install linkage roller plate (3) with two flat washers (6), two lockwashers (5), and two nuts (4).
2.
Install eight rollers (2) and eight bolts (1) to linkage roller plate (3).
END OF WORK PACKAGE
0371 00-1/2 blank
