TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
REFLECTORS AND MOUNTING PLATES REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Lockwashers (4) (item 640, WP 0491 00)
Nuts (4) (item 763, WP 0491 00)
Materials/Parts
Screws (4) (item 370, WP 0491 00)
Lockwashers (4) (item 638, WP 0491 00)
Screws (4) (item 400, WP 0491 00)
NOTE
The following procedures apply to both left and right reflectors.
Removal
1.
Remove two screws (1), two lockwashers (2), and reflector mounting plate (3).
2.
Remove two screws (4), reflector (5), two lockwashers (6), and two nuts (7).
Installation
1.
Install reflector (5), two screws (4), two lockwashers (6), and two nuts (7).
2.
Install reflector mounting plate (3), two lockwashers (2), and two screws (1).
END OF WORK PACKAGE
0451 00-1/2 blank
