TM 9-2350-256-20-2
0452 00
Removal
1.
Disconnect wiring harness (1) from flasher (2).
2.
Remove two screws (3), three lockwashers (4), flat washer (5), ground lead (6), and flasher (2).
3.
Disconnect wiring harness (7) from warning horn relay (8).
4.
Remove two screws (9), two lockwashers (10), and warning horn relay (8).
5.
Remove two screws (11), two lockwashers (12), and mounting plate (13).
Installation
1.
Install mounting plate (13), two screws (11), and two lockwashers (12).
2.
Install warning horn relay (8), two screws (9), and two lockwashers (10).
3.
Connect wiring harness (7) to warning horn relay (8).
4.
Install flasher (2), ground lead (6), two screws (3), three lockwashers (4), and flat washer (5).
5.
Connect wiring harness (1) to flasher (2).
END OF WORK PACKAGE
0452 00-2
