TM 9-2350-256-20-2
0473 00
CAUTION
Do not apply adhesive sealant to fire extinguisher nozzle caps.
3.
Install kit-furnished rubber cap (4) in two fire extinguisher nozzles (5) in main winch compartment.
NOTE
All of the following items are kit furnished unless otherwise noted.
4.
Install strainer assembly (6) and bilge pump assembly (7) with four screws (8), four lockwashers (9), and eight flat washers
(10).
5.
Install bent tube (11) with spanner wrench (item 10, WP 0465 00) and existing wiring harness (12) to bilge pump assembly
(7).
6.
Connect hose (13) to bent tube (11) with clamp (14).
7.
Connect bent tube (15) to hose (13) with clamp (16).
8.
Connect one end of hose (17) to bent tube (15) with clamp (18) and other end to bent tube (19) with clamp (20).
0473 00-2
