TM 9-2350-256-20-2
0471 00
Installation
NOTE
Items removed for installation of kit and not reused should be stowed for reinstallation when kit parts
are removed.
1.
Install kit-furnished cover (1) and gasket (2) over acetylene vent holes with three kit-furnished screws (3) and three
lockwashers (4). Apply adhesive sealant (item 4, WP 0465 00) to gasket upon installation.
2.
Install kit-furnished loop clamp (5) over fuel tank vent hose (6) and secure with fourth kit-furnished screw (3) and lock-
washer (4).
3.
Install kit-furnished elbow (7) in cover (1).
4.
Connect kit-furnished tube assembly (8) to tube assembly (9) with kit-furnished union (10).
5.
Place two kit-furnished loop clamps (11) over kit-furnished tube assembly (8).
6.
Connect end of tube assembly (9) to kit-furnished elbow (7).
7.
Secure kit-furnished tube assembly (8) to left air inlet pipe (12) with two kit-furnished screws (13) and two lockwashers
(14).
END OF WORK PACKAGE
0471 00-2
