TM 9-2350-256-20-2
0469 00
Installation
1.
Bond kit-furnished rubber strip (1) to left and right kit-furnished air inlet pipes (2) with adhesive sealant (item 4, WP 0465
2.
Remove four existing screws (3) and four lockwashers (4) securing armor covers (5). Do not remove either armor cover.
3.
Install left and right kit-furnished air inlet pipes (2) and secure each with four previously removed screws (3) and four
lockwashers (4). Apply adhesive sealant (item 4, WP 0465 00) around heads of screws and base of air inlet pipes at
installation.
4.
Install four kit-furnished screws (6) and four lockwashers (7) in both left and right air inlet pipes (2).
END OF WORK PACKAGE
0469 00-2
