TM 9-2350-256-20-2
0473 00
9.
Secure hose (17) to existing fire extinguisher tubing (21) with clamp (22).
10. Install grommet (23) in opening from which rear intermediate right access cover (3) was removed.
11. Route hose (24) through grommet (23) and attach one end to bent tube (19) with clamp (25).
12. Remove cover (26) from hull by removing two existing screws (27) and two lockwashers (28). Retain screws.
13. Install adapter (29) and gasket (30) to outside of hull with two screws (27) and two lockwashers (28).
14. Connect second end of hose (24) to adapter (29) and secure with clamp (31).
15. Secure hose (24) to bulkhead with clip (32), lockwasher (33), and screw (34).
16. Connect adapter (35) to adapter (29) using spanner wrench (item 10, WP 0465 00).
17. Attach seal (36) to adapter (35) with clamp (37).
18. Wrap asbestos tape several times around personnel heater exhaust (38), applying sodium silicate (item 6, WP 0465 00)
while wrapping.
END OF WORK PACKAGE
0473 00-3/4 blank
