CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-67 REPLACE/SERVICE MECHANIC'S AND DRIVER'S SEAT ASSEMBLIES-Continued
a. REMOVAL
1
Remove backrest and support assembly (1) by pulling straight out of retainer assembly (2) socket.
2
Remove seat assembly (3) by removing two screws (4) and two lockwashers (5) at top, and two screws (6),
two lockwashers (7), and two nuts (8) at seat support (9).
3
Remove seat support (9) by removing four screws (10) and four lockwashers (11).
b. DISASSEMBLY
1
Remove support (12) from backrest (13) by removing wing nut (14), lockwasher (15), and screw (16).
2
Remove seat pan (17) by removing nut (18), lockwasher (19), two nuts (20), and two lockwashers (21).
9-126
