SECTION IV: SEAT ASSEMBLIES
TM 9-2350-256-20
3
Replace springs if proven defective.
4
Repair tapped holes with a thread chaser.
5 If wear or breakage affects ease of seat adjustment, replace defective part or parts.
6
Replace pedestal assembly (50) if defective.
e. ASSEMBLY
1
Install pull handle (47) with spring (45), collar (46), and pin (44).
2
Install knob (43) to release assembly (40).
3
Install release assembly (40) to carriage assembly (8) with axle (42) and two new cotter pins (41).
4
Install arm (34) and guard (35) to carriage assembly (8) and base (39) with two axles (36 and 37) and four
new cotter pins (38).
5
Install bracket (31) to carriage assembly (8) and base (39) with two axles (28 and 32) and four new cotter
pins (33).
6
Install spring retainer (30) and two springs (29).
7
Install two adjuster springs (27) to spring retainer (30) and axle (28).
8
Install base assembly (23) with four screws (26), four new lockwashers (25), and four nuts (24).
9-123
