SECTION IV: SEAT ASSEMBLIES
TM 9-2350-256-20
f. INSTALLATION
Install rigger's seat assembly (1) with four screws (2)
and four new lockwashers (3).
9-67 REPLACE/SERVICE MECHANIC'S AND DRIVER'S SEAT ASSEMBLIES
THIS TASK COVERS
a. Removal
b. Disassembly c. Inspection
d. Repair
e. Assembly
f. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C,
Lockwashers (4) (Appendix G, item 129)
item 53)
Lockwashers (8) (Appendix G, item 131)
Awl, saddler's sewing (Appendix C, item 2)
Lockwashers (7) (Appendix G, item 132)
File, thread restorer (thread chaser) (Appendix C,
Lockwashers (2) (Appendix G, item 143)
item 13)
Lockwashers (2) (Appendix G, item 134)
Hammer, hand (mallet) (Appendix C, item 16)
Lockwasher (Appendix G, item 144)
Pliers, retaining ring, external (Appendix C, item
Lockwashers (2) (Appendix G, item 98)
31)
Lockwashers (2) (Appendix G, item 99)
NOTE
The following procedures are the same for both the driver's and mechanic's seat
assemblies. Driver's seat assembly is shown.
9-125
