TM 9-2350-256-20
CHAPTER 16
MAINTENANCE OF EXHAUST SMOKE GENERATING SYSTEM
CHAPTER OVERVIEW
This chapter describes how to remove, disassemble, assemble, and install the exhaust smoke generating system.
This chapter consists of the following sections:
Page
Section I:
Engine Components................................................. 16-1
Section II:
Hull Components ..................................................... 16-7
SECTION I: ENGINE COMPONENTS
Para.
Task
Page
16-1
Replace Solenoid Valve Assemblies and Bracket .................................................................................... 16-1
16-2
Replace Fuel Tube Assemblies ............................................................................................................... 16-3
16-3
Replace Fuel Shutoff Valve Assembly..................................................................................................... 16-6
16-1 REPLACE SOLENOID VALVE ASSEMBLIES AND BRACKET
THIS TASK COVERS
a.
Removal
b.
Installation
INITIAL SET-UP
Tools:
Tools-Continued:
Reference:
• Tool kit, general mechanic's
• Wrench, torque (Appendix C,
TM 9-2350-256-10
(Appendix C, item 53)
item 62)
• Socket set (Appendix C, item
Equipment Condition:
49)
Part:
Engine deck removed (see
• Vise, soft-jaw (Appendix C,
Nut, self-locking (Appendix G,
paragraph 9-51)
item 54)
item 168)
a.
REMOVAL
1
Disconnect two cable assemblies (1) from two solenoid valves (2)
2
Disconnect ground lead (3) by removing screw (4) and self-locking nut (5).
16-1
