CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6— 1 REPLACE/REPAIR ENGINE GENERATOR, CRADLE, SUPPORT, AND RELATED PARTS -Continued
NOTE
Generator exhaust boot (31) is removed
after removal of generator (32).
13 Slide generator exhaust boot (31) and remove six
nuts (33) using wrench.
14 Disconnect ground strap (28) by removing self-
locking nut (34) and flat washer (35).
CAUTION
Place board under end of generator (32) for
support.
15 Cut lockwire (36) and remove four screws (37), four
flat washers (38), and generator cradle (39).
16 Separate bracket (40) from generator cradle (39) by removing self-locking gut (41) and flat washer (42).
17 Remove generator (32) by turning counterclockwise.
18 Remove generator exhaust boot (31).
6—
4
