CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6 1 REPLACE/REPAIR ENGINE GENERATOR, CRADLE, SUPPORT, AND RELATED PARTS--Continued
16 Install gasket (10) and grille (9) using four new
lockwashers (12) and four screws (11).
17 Install hose (8) using two clamps (7).
18 Install tube (6) using two screws (3), two new
lockwashers (4), and bracket (5).
19 Install hose (2) using two clamps (1).
20 Install test cables and hoses. Test run engine prior
to installation. Check for proper generator output.
NOTE
Follow-on maintenance:
Install powerplant
(see paragraph 3-1)
6 2 REPLACE MASTER RELAY HOUSING (DUAL AND SINGLE VOLTAGE)
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Equipment Conditions:
Tool kit, general mechanic's (Appendix C, item 53)
Grille removed (see paragraph 9-15)
Battery ground cables disconnected (see
Parts:
paragraph 6-4)
Drivescrews (2) (Appendix G, item 11)
Lockwashers (4) (Appendix G, item 107)
6
8