CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITSTM 9-2350-256-206— 4 REPLACE BATTERIES, BATTERY TRAYS, AND TERMINALTHIS TASK COVERSa. Removalb. InstallationINITIAL SET-UPTools:Material/Parts-Continued:Tool kit, general mechanic's (Appendix C, item 53)•Lockwashers (12) (Appendix G, item 132)•Lockwasher (Appendix G, item 133)Material/Parts:•Paint, acid-resistant (Appendix D, item 8)Equipment Condition:•Lockwashers (6) (Appendix G, item 108)Left-side grille doors opened (see paragraph 9-60)WARNINGBe certain MASTER switch is OFF when working on electrical system to avoid electrical shock and burns.a.REMOVALNOTEGround cables (1) must be disconnected prior to disconnecting positive leads.1Disconnect three ground cables (1) with terminal adapters (2) from battery terminals (3). Remove three ground cables from vehicle by removing screw (4) and two lockwashers (5) from each.2Pull back six rubber insulators (6) and disconnect three (series) cables (7) with terminal adapters (8) from battery terminals (9).3Pull back three rubber insulators (10) and disconnect three (parallel) cables (11) and lead (12) with terminal adapters (13) from battery terminals (14).6-12
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
