SECTION II: GAGES AND SWITCH PANELS
TM 9-2350-256-20
7
Remove six clamps (32) by removing two nuts (33) and two lockwashers (34) from each.
8
Remove each indicating meter (24 and 27 through 31) from front of gage panel (8).
9
Remove ID plates (35, 36, and 37) by removing two drivescrews (38) from each.
10 Disconnect three connectors (39) from fuel selector switch (40).
11 Remove fuel selector switch instruction plate (41) and fuel selector switch (40) from gage panel (8) by
removing two screws (42) and two lockwashers (43).
6-21
