SECTION II: GAGES AND SWITCH PANELS
TM 9-2350-256-20
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and bums.
a. REMOVAL
1
Remove ground strap (1) by removing two screws
(2) and three lockwashers (3).
2
Disconnect
tachometer
connector
(4)
and
speedometer connector (5).
3
Remove three screws (6) and three lockwashers (7).
4
Pull gage panel (8) forward and disconnect wiring
harness (9).
5
Remove wiring harness (10) by removing four
screws (11) and four lockwashers (12).
6
Remove gage panel (8).
NOTE
Screw (2) and lockwasher (3) were
removed with ground strap (1).
7
Remove mounting bracket (13) by removing three
screws (14) and three lockwashers (15
6-19