CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-8 REPLACE/REPAIR GAGE PANEL ASSEMBLY-Continued
8
Install five indicator lights (19) using two screws (21) and two new lockwashers (22) for each.'
9
Connect connectors (23) to each of five indicator lights (19).
NOTE
Gaskets (20) are present on three of the lamps (18).
10 Install three gaskets (20).
11 Install five lamps (18) to indicator lights (19) by depressing and turning clockwise.
12 Install five preformed packings (17) and five light lenses (16).
d. INSTALLATION
NOTE
Screw (2) and new lockwasher (3) are installed with ground strap (1).
1
Install mounting bracket (13) using three screws (14) and three new lockwashers (15).
2
Install wiring harness (10) using four screws (11) and four new lockwashers (12).
3
Connect wiring harness (9).
6-24
