CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
SECTION IV: LIGHTING SYSTEM
Para.
Task
Page
6-23
Replace Stoplight Switch ..............................................................................................................6-56
6-24
Replace Rigger's Service Light Switch..........................................................................................6-57
6-25
Replace Driver's Headlight Dimmer Switch and Mounting Bracket................................................6-58
6-26
Replace/Repair Front Headlight Assembly....................................................................................6-58
6-27
Replace/Repair Rigger's Service Light..........................................................................................6-62
6-28
Replace/Repair Front Signal Light Assembly ................................................................................6-64
6-29
Replace Spare Headlight Mount Base Assembly ..........................................................................6-65
6-30
Replace/Repair Stoplight-taillight Assemblies ...............................................................................6-66
6-31
Replace Troublelight Assembly ...................................................................................................6-67
6-32
Replace/Repair Rigger's Fixed Spotlight and Related Parts ..........................................................6-68
6-33
Replace/Repair High Beam Indicator Light Assembly ...................................................................6-70
6-34
Replace/Repair Dome light...........................................................................................................6-71
6-35
Replace/Repair Winch Illumination Lamp Assembly .....................................................................6-72
6-23 REPLACE STOPLIGHT SWITCH
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C, item 53)
Lockwashers (2) (Appendix G, item 116)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and bums.
a. REMOVAL
1 Disconnect two connectors (1) and remove two
slotted washers (2) and two connector shells (3).
2 Remove stoplight switch (4) by removing two
screws (5) and two lockwashers (6).
b. INSTALLATION
1 Install stoplight switch (4) using two new
lockwashers (6) and two screws (5).
2 Assemble two connector shells (3) and two slotted
washers (2) to two connectors (1) and connect
connectors.
6-56