SECTION IlI: SENDING UNITS, WARNING LIGHT SWITCHES, AND
TM 9-2350-256-20
WARNING HORNS
a. REMOVAL
NOTE
Headlight removed for clarity only .
1 Disconnect two connectors (1) from external
vehicle warning horn (2).
2 Remove external vehicle warning horn (2) and
ground lead (3) by removing two screws (4) and
two lockwashers (5).
3 Disconnect connectors (6).
5 Remove wheel (7) with horn switch (8) by
removing three screws (9) and three lockwashers
(10).
6 Remove horn switch (8) from wheel (7).
b. DISASSEMBLY
Disassemble leads (see Chapter 6, Section VII).
c. ASSEMBLY
Assemble leads (see Chapter 6, Section VII).
d. INSTALLATION
1 Install wheel (7) to horn switch (8).
2 Install wheel (7) with horn switch (8) using three
screws (9) and three new lockwashers (10).
3 Connect connectors (6).
4 Install external vehicle warning horn (2) and
ground lead (3) using two screws (4) and two new
lockwashers (5).
5 Connect two connectors (1) to external vehicle
warning horn (2).
6-53
