CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-25 REPLACE DRIVER'S HEADLIGHT DIMMER SWITCH AND MOUNTING BRACKET
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C, item 54)
Lockwashers (3) (Appendix G, item 106)
Lockwashers (2) (Appendix G, item 118)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and burns.
a. REMOVAL
1 Disconnect connector (1).
2 Remove mounting bracket (2) by removing three
screws (3) and three lockwashers (4).
3 Remove dimmer switch (5) by removing two
screws (6) and two lockwashers (7).
b. INSTALLATION
1 Assemble dimmer switch (5) to mounting bracket
(2) using three screws (6) and three new
lockwashers (7).
2 Install mounting bracket (2) using two screws (3)
and two new lockwashers (4).
3 Connect connector (1).
6-26 REPLACE/REPAIR FRONT HEADLIGHT ASSEMBLY
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Materials/Parts-Continued:
Tool kit, general mechanic's (Appendix C, item 53)
Gaskets (2) (Appendix G, item 43)
Gaskets (2) (Appendix G, item 44)
Materials/Parts:
Gasket (Appendix G, item 45)
Adhesive (Appendix D, item 5)
Gaskets (2) (Appendix G, item 79)
Silicone Compound (Appendix D, item 28)
Lockwashers (2) (Appendix G, item 103)
Grease, aircraft (Appendix D, item 14)
Lockwashers (6) (Appendix G, item 104)
Gasket (Appendix G, item 40)
Lockwashers (3) (Appendix G, item 114)
Gasket (Appendix G, item 42)
Lockwashers (4) (Appendix G, item 97)
6-58
