SECTON IV: LIGHTING SYSTEM
TM 9-2350-256-20
b. DISASSEMBLY
1 Loosen four screws (9) and remove door (10) from body (11).
2 Loosen four screws (12) and remove lens retainer (13), light lens (14), and gasket (15). Discard gasket.
3 Remove lamp (16) from body (11).
4 Remove and discard preformed packing (17).
c. ASSEMBLY
1 Install new preformed packing (17) to body (11).
2 Install lamp (15) to body (11).
3 Install new gasket (15), light lens (14), and lens retainer (13) to door (10). Tighten four screws (12).
4 Install door (10) to body (11) tighten four screws (9).
d. INSTALLATION
1 Install rigger's service headlight (4) using nut (5), new lockwasher (6), finishing washer (7), and recessed washer (8).
2 Install connector (3) and dummy plug (2).
3 Connect connector (1).
6-63