CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS TM 9-2350-256-206-28 REPLACE/REPAIR FRONT SIGNAL LIGHT ASSEMBLYTHIS TASK COVERSa. Removalb. Disassemblyc. Assemblyd. InstallationINITIAL SET-UPTools:Parts:Tool kit, general mechanic's (Appendix C, item 53)Lockwasher (Appendix G, item 132)WARNINGBe certain MASTER switch is OFF when working on electrical system to avoid electrical shock and bums.a. REMOVAL1 Disconnect connector (1) .2 Remove front signal light (2) by removing nut (3),lockwasher (4), and finishing washer (5).3 Loosen three captive screws (6) and pull forwardlight door (7) with lamp (8).4 Disconnect connector (9) and electrical cable (10)and remove light door (7) with lamp (8).5 Remove grommet (11) and connector (12).6 Remove three retaining springs (13) from lightdoor (7).7 Remove lamp (8) from light door (7).b. DISASSEMBLYDisassemble connectors (see Chapter 6, Section VII) .c. ASSEMBLYAssemble connectors (see Chapter 6, Section VII).6-64
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business