SECTION IV: LIGHTING SYSTEM
TM 9-2350-256-20
2 Install reflector (24) and marker light (25) .
3 Apply light coating of silicone compound to socket
and install B.O. lamp (23) by depressing and
turning clockwise.
4 Apply light coating of adhesive then grease to
mating sealing surface and install new gasket (22),
lens (21), filter (20), two gaskets (19), retainer (18),
two new lockwashers (17), and two screws (16) to
shield (6).
5 Install new gasket (15).
6 Install shield (6) to cover (5) using three new
lockwashers (14) and three screws (13).
7 Install two gaskets (12) to two lenses (8).
8 Install two lenses (8) to cover (5) using two
retainers (11), six new lockwashers (10), and six
screws (9).
9 Install new gasket (7).
10 Apply light coating of grease to mating surface and install cover (5) using four new lockwashers (4) and four screws
(3) to headlight assembly (2).
d. INSTALLATION
Install headlight assembly (2) by tightening adjustment nut (1).
6-61