SECTION IlI: SENDING UNITS, WARNING LIGHT SWITCHES, AND
TM 9-2350-256-20
WARNING HORNS
6-16 REPLACE/REPAIR FIRE EXTINGUISHER INTERLOCK SWITCH ASSEMBLY
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Tool kit, general mechanic's (Appendix C, item 53)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and bums.
a. REMOVAL
1 Disconnect two connectors (1 and 2) from fire extinguisher interlock (3).
2 Remove push switch (4) from bracket (5) by loosening locknut (6).
b. DISASSEMBLY
Disassemble switch assembly (see Chapter 6, Section VII).
c. ASSEMBLY
Assemble switch assembly (see Chapter 6, Section VII).
d. INSTALLATION
1 Connect push switch (4) to bracket (5) by tightening locknut (6).
2 Connect two connectors (1 and 2) to fire extinguisher interlock (3).
6-17 REPLACE/REPAIR POWER CONTROL LEVER SWITCH
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tool:
Parts:
Tool kit, general mechanic's (Appendix C, item 53)
Lockwashers (4) (Appendix G, item 129)
6-49
