SECTION IlI: SENDING UNITS, WARNING LIGHT SWITCHES, AND
TM 9-2350-256-20
WARNING HORNS
6-15 REPLACE/REPAIR DRIVER'S PASSIVE NIGHT VIEWER SWITCH AND LIGHT AND B.O. RECEIVER SWITCH
AND LIGHT
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C, item 53)
Lockwashers (4) (Appendix G, item 104)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and bums.
NOTE
Driver's passive night viewer switch and light and B.O. receiver switch and light are removed and installed in the
same manner.
a. REMOVAL
1 Disconnect connector (1) from driver's night viewer light (2).
2 Remove light cover (3) by turning counterclockwise.
3 Remove driver's night viewer light (2) by removing two screws (4) and two lockwashers (5).
4 Disconnect two connectors (6) from driver's night viewer switch (7).
5 Remove driver's night viewer switch (7) and identification (ID) plate (8) by removing two screws (9) and two
lockwashers (10).
6-47
