SECTION V: VEHICLE WIRING
TM 9-2350-256-20
b. DISASSEMBLY
Disassemble lead assembly (10) (see Chapter 6,
Section VII).
c. ASSEMBLY
Assemble lead assembly (10) (see Chapter 6, Section
VII).
d. INSTALLATION
1
Install connector (2) at engine disconnect (6) using
four screws (9), four new lockwashers (8), and
four nuts (7).
2
Install lead (1) on generator (3) using flat washer
(5) and nut (4).
NOTE
Follow-on maintenance:
Install powerplant (see
paragraph 3-1)
6-37 REPLACE/REPAIR MASTER RELAY TO RECTIFIER LEAD ASSEMBLY (SINGLE VOLTAGE)
(10866904)
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
WARNING
Be certain MASTER switch is OFF and negative battery leads are disconnected to avoid
electrical shock and burns.
a. REMOVAL
Remove lead assembly (1).
b. DISASSEMBLY
Disassemble lead assembly (1) (see Chapter 6,
Section VII).
c. ASSEMBLY
Assemble lead assembly (1) (see Chapter 6, Section
VII).
d. INSTALLATION
Install lead assembly (1).
6-77
