CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-39 REPLACE/REPAIR STARTER LEAD ASSEMBLY (10887570)-Continued
a. REMOVAL
1
Remove lead (1) from starter support bracket by removing machine bolt (3) and flat washer (4).
2
Remove lead (2) from starter (5) by removing nut (6) and lockwasher (7). Remove lead assembly (8).
b. DISASSEMBLY.
Disassemble lead assembly (8) (see Chapter 6, Section VII).
c. ASSEMBLY
Assemble lead assembly (8) (see Chapter 6, Section VII).
d. INSTALLATION
1 Install lead (2) to starter (5) using nut (6) and lockwasher (7).
2
Install lead (1) to starter support bracket using machine bolt (3) and flat washer (4).
NOTE
Follow-on maintenance:
Install powerplant (see paragraph 3-1)
6-80