SECTION IV: LIGHTING SYSTEMTM 9-2350-256-20WARNINGBe certain MASTER switch is OFF when working on electrical systems to avoid electrical shock or burns.a. REMOVALRemove winch compartment light (1) from floor plate(2), by removing nut (3), lockwasher (4), and spacer(5).b. DISASSEMBLY1 Loosen three captive screws (6) and pull forwardlight door (7) with lamp (8).2 Disconnect connector (9) and electrical cable (10)and remove light door (7) with lamp (8) from body(11).3 Remove grommet (12) and connector (13) frombody (11).4 Remove three retaining springs (14) from lightdoor (7).5Remove lamp (8) from light door (7).6Disassemble two connectors (see Chapter 6,Section VII).c. ASSEMBLY1 Assemble two connectors (see Chapter 6, SectionVII).2Install lamp (8) to light door (7).3Install three retaining springs (14) to light door (7).4Install grommet (12) and connector (13) to body(11).5 Connect connector (9) and electrical cable (10) tobody (11).6 Install light door (7) with lamp (8) and tighten threecaptive screws (6).d. INSTALLATIONInstall winch compartment light (1) to floor plate (2)using spacer (5), new lockwasher (4), and nut (3).NOTEFollow-on maintenance:Install stowage basket intermediate forward floor plate (seeparagraph 9-21)6-73
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
