SECTION IV: LIGHTING SYSTEM
TM 9-2350-256-20
6-34 REPLACE/REPAIR DOME LIGHT
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C, item 53)
Lockwashers (16) (Appendix G, item 126)
Seal, rubber (Appendix G, item 265)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and burns.
NOTE
The following procedures are the same for all four dome lights.
a. REMOVAL
1
Disconnect connector (1).
2
Remove dome light (2) by removing four screws
(3) and four lockwashers (4).
b. DISASSEMBLY
1
Remove door assembly (5) by loosening eight
screws (6) with retaining rings (7).
2
Remove two lamps (8) by depressing and turning
counterclockwise.
3
Disconnect lead (9) by removing screw (10) and
lockwasher (11).
4
Remove and discard rubber seal (12) from door
assembly (5).
6-71
