CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-61 REPLACE/REPAIR ENGINE DISCONNECT TO STARTER WIRING HARNESS (DUAL VOLTAGE) (12314745)-
Continued
a. REMOVAL
1
Remove clamp (5) by removing screw (6) and lockwasher (7).
2
Disconnect connector (1) from engine disconnect (8) by removing four screws (9), four lockwashers (10), and four
nuts (11).
3
Disconnect connector (2) from fuel solenoid wiring harness (12).
4
Remove two connectors (3 and 4) from starter (13) by removing nut (14) and lockwasher (15).
6-160