SECTION V: VEHICLE WIRING
TM 9-2350-256-20
WARNING
Be certain MASTER switch is OFF when working on electrical systems to avoid electrical
shock and burns.
Connector No.
Electrical Lead To:
Wire No.
1
Ground
GND
2
Ground
GND
3
Engine disconnect
510, GND, GND
4
Bulkhead to main engine bracket and rear fuel tank transmitter
510
wiring harness
a. REMOVAL
1
Remove two clamps (5) by removing screw (6) and lockwasher (7) from each.
2
Remove two ground leads (1 and 2) from hull (8) by removing screw (9) and two lockwashers (10).
3
Disconnect connector (3) from engine disconnect (11).
4
Disconnect connector (4) from bulkhead to main engine bracket and rear fuel tank transmitter wiring harness (12).
6-163
