LIGHTS TROUBLESHOOTING

MAIN WINCH FAILS TO OPERATE OR FAILS TO DEVELOP FULL POWER - TM-9-2350-292-10_260

TM-9-2350-292-10 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
240

TM 9--2350--292--10 LIGHTS TROUBLESHOOTING 0092 00 THIS WORK PACKAGE COVERS: Any light (except warning indicator and flasher light) flickers, will not go off or will not come on 0092 00--1 . . . . . . . MASTER indicator will not come on when MASTER switch is ON 0092 00--1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . One or both winch lights fail to operate 0092 00--1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Panel or vehicle lights do not work 0092 00--1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warning FLASHER fails to operate 0092 00--1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . When activating LAMP switch TEST, indicator will not come on 0092 00--1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INITIAL SETUP: Personnel Required Three ANY LIGHT (EXCEPT WARNING INDICATOR AND FLASHER LIGHT) FLICKERS, WILL NOT GO OFF OR WILL NOT COME ON Step 1. Check lamp. Tighten or replace lamp as required. Step 2. If problem still exists, notify unit maintenance (LIGHTS). MASTER INDICATOR WILL NOT COME ON WHEN MASTER SWITCH IS ON Step 1. Check lamp. Replace lamp. Step 2. If problem still exists, notify unit maintenance (LIGHTS). ONE OR BOTH WINCH LIGHTS FAIL TO OPERATE Step 1. Reset winch light circuit breaker switch on PTO/Accessory panel. Step 2. If problem still exists, notify unit maintenance (ONE OR BOTH WINCH LIGHTS FAIL TO OPERATE). PANEL OR VEHICLE LIGHTS DO NOT WORK Step 1. Check MASTER switch. Turn MASTER switch ON. Step 2. If problem still exists, notify unit maintenance (LIGHTS). WARNING FLASHER FAILS TO OPERATE Step 1. Check lamp. Replace lamp. Step 2. If problem still exists, notify unit maintenance (WARNING FLASHER LIGHT FAILS TO OPERATE). WHEN ACTIVATING LAMP SWITCH TEST, INDICATOR WILL NOT COME ON Step 1. Check lamp. Replace lamp. Step 2. If problem still exists, notify unit maintenance. (WHEN ACTIVATING LAMP SWITCH TEST, INDICA- TOR WILL NOT COME ON). END OF TASK 0092 00--1/2 blank

Privacy Statement
Press Release
Contact