TM 9--2350--292--20--1
ENGINE SHROUD SEALS REPLACEMENT
0190 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (28) (item 2, WP 0718 00)
Equipment Conditions
Engine deck assembly removed (WP 0417 00)
NOTE
This task covers complete replacement of all engine
shroud seals. Perform only those steps necessary to re-
place the defective parts.
Removal
1. Remove 28 screws (1), 28 flat washers (2), 28 lockwashers (3), four seals (4), two seals (5) and two seals (6)
from engine (7). Discard lockwashers.
2. Inspect parts for damage and replace as required.
Installation
Install two seals (6), two seals (5) and four seals (4) on engine (7) with 28 screws (1), 28 new lockwashers (3) and 28
flat washers (2).
Figure 2
4
7
6
5
5
4
4
4
6
1
3
2
HYDRAULIC OIL COOLERS
REMOVED FOR CLARITY
NOTE
FOLLOW--ON MAINTENANCE:
Install engine deck assembly (WP 0417 00)
END OF TASK
0190 00--1/2 blank
