TM 9--2350--292--20--1
ENGINE AIR INTAKE ELBOW REPLACEMENT
0191 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Materials/Parts
Lockwashers (8) (item 10, WP 0718 00)
Gasket (item 233, WP 0718 00)
Equipment Conditions
Engine deck assembly removed (WP 0417 00)
Personnel Required
Two
NOTE
The procedures are the same for both left and right air
intake elbows.
Removal
1. Remove clamp (1) and air intake hose (2) from elbow (3).
2. Remove eight nuts (4), eight lockwashers (5), eight flat washers (6), elbow (3) and gasket (7). Discard lockwash-
ers and gasket.
3. Inspect parts for damage and replace as required.
Installation
1. Install elbow (3) and new gasket (7) with eight flat washers (6), eight new lockwashers (5) and eight nuts (4).
2. Install air intake hose (2) on elbow (3) with clamp (1).
Figure 2
7
6
5
4
1
2
3
HYDRAULIC OIL COOLERS
REMOVED FOR CLARITY
NOTE
FOLLOW--ON MAINTENANCE:
Install engine deck assembly (WP 0417 00)
END OF TASK
0191 00--1/2 blank
