TM 9--2350--292--20--1
0193 00--1
ENGINE REAR MOUNT AND BASE ASSEMBLY REPAIR
0193 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Cotter pins (8) (item 15, WP 0718 00)
Cotter pins (4) (item 51, WP 0718 00)
Lockwashers (3) (item 9, WP 0718 00)
Lockwashers (8) (item 2, WP 0718 00)
Lockwashers (4) (item 84, WP 0718 00)
Equipment Conditions
Powerpack removed (WP 0188 00)
NOTE
Perform Removal steps 1, 2, 3 and Disassembly step 4
and Installation steps 14, 15 and 16 for replacement of
base assembly.
Perform Disassembly steps 1 through 4 and Assembly
steps 1 through 3 for maintenance of base assembly.
Removal
1. Remove cotter pin (1) and straight headed pin (2) from universal joint (3). Discard cotter pin.
2. Remove four screws (4) and four lockwashers (5) from base assembly (6). Discard lockwashers.
3. Slide tension bolt (7) out of universal joint (3) and remove base assembly (6) from vehicle hull.
Figure 3
FORWARD
1
2
3
4
5
6
7
