TM 9--2350--292--20--1
0193 00--6
ENGINE REAR MOUNT AND BASE ASSEMBLY REPAIR -- CONTINUED
0193 00
Installation--Continued
7. Install lower vertical shaft (25) in universal joint (28) with straight headed pin (27) and new cotter pin (26).
8. Install lower vertical shaft (25) in universal joint (19) with straight headed pin (24) and new cotter pin (23).
9. Position shaft collar (21) on upper vertical shaft (22), install upper vertical shaft (22) in universal joint (19).
10. Install straight headed pin (18) and new cotter pin (17) in universal joint (19). Tighten set screw (20) in shaft collar
(21).
11. Install universal joint (13) on coupling shaft (16) with straight headed pin (15) and new cotter pin (14).
12. Install straight shaft (10) in universal joint (13) with straight headed pin (12) and new cotter pin (11).
13. Install universal joint (3) on straight shaft (10) with straight headed pin (9) and new cotter pin (8).
Figure 3
8
9
3
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
