TM 9--2350--292--20--1
0193 00--3
ENGINE REAR MOUNT AND BASE ASSEMBLY REPAIR -- CONTINUED
0193 00
Removal--Continued
11. Remove cotter pin (29), straight headed pin (30) and universal joint (28) from coupling shaft (31). Discard cotter
pin.
12. Loosen set screw (32), remove coupling shaft (31) and machine key (33) from gear assembly (34).
13. Loosen set screw (35), remove coupling shaft (16) and machine key (36) from gear assembly (34).
14. Remove three screws (37), three lockwashers (38), three nuts (39) and gear assembly (34) from bracket (40).
Discard lockwashers.
15. Remove four screws (41), four lockwashers (42) and bracket (40) from bulkhead. Discard lockwashers.
16. Remove four screws (43), four lockwashers (44), instruction plate (45) and shaft adapter bracket (46). Discard
lockwashers.
Figure 3
29
30
28
31
32
33
34
35
16
36
37
38
39
40
41
42
43
43
44
44
45
46
