TM 9--2350--292--20--1
0192 00--1
ENGINE MOUNT ASSEMBLY REPAIR
0192 00
THIS WORK PACKAGE COVERS:
Removal, Disassembly, Assembly, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Torque wrench (item 9, WP 0717 00)
Socket wrench socket (item 29, WP 0717 00)
Materials/Parts
Self--locking nuts (8) (item 231, WP 0718 00)
Self--locking nuts (4) (item 235, WP 0718 00)
Equipment Conditions
Powerpack removed (WP 0188 00)
Removal
Remove six self--locking nuts (1), six flat washers (2), six screws (3) and mount assembly (4). Discard self--locking
nuts.
Disassembly
1. Remove two self--locking nuts (5), two screws (6) and saddle assembly (7). Discard self--locking nuts.
NOTE
Note the quantity and position of shim(s) being removed
to ensure shim(s) are installed in the same position.
2. Remove two self--locking nuts (8), two screws (9), two resilient mounts (10), shim(s) (11) and spacer sleeve (12)
from each end of saddle (13). Discard lockwashers.
3. Inspect parts for damage and replace as required.
Figure 2
6
1
2
3
4
7
5
9
10
11
12
13
10
8
