Removal (cont) - TM-9-2350-292-20-1

Removal (cont) - TM-9-2350-292-20-1_1125

Disassembly (cont) - TM-9-2350-292-20-1_1127

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
1079

TM 9--2350--292--20--1 0220 00--4 FUEL/WATER SEPARATOR FILTERS REPAIR -- CONTINUED 0220 00 Removal--Continued 6. Remove drain hose (12) and elbow/filter (13). 7. Remove three screws (14), three lockwashers (15), two clamps (16), six flat washers (17) and fuel/water separa- tor filter (3) from bracket (18). Discard lockwashers. NOTE The following steps provide for a complete removal of related components of the fuel/water separator. Perform only those steps necessary for maintenance or replace- ment of defective parts. 8. Remove three screws (19), three flat washers (20) and bracket (18) from engine. 9. Remove adapter (9), elbow (7), tee (21) and elbow (5) from fuel/water separator filter (3). 10. Remove two adapters (22) from fuel/water separator filter (3). 11. If new separator is installed, remove bleeder valve (2) for installation in new unit. Figure 29 18 3 20 19 2 17 13 12 9 21 7 16¹⁷ 15 14 16 15 5 14 17 17 22

Privacy Statement
Press Release
Contact