TM 9--2350--292--20--1
0220 00--6
FUEL/WATER SEPARATOR FILTERS REPAIR -- CONTINUED
0220 00
Installation
1. Apply pressure sensitive tape to all threaded pipe and hose fittings.
2. Install two adapters (22).
3. Install elbow (5), tee (21), adapter (9) and elbow (7).
4. Install bracket (18) on engine with three screws (19) and three flat washers (20).
5. Install fuel/water separator filter (3) and two fuel line clamps (16) on bracket (18) with three screws (14), three new
lockwashers (15) and six flat washers (17).
6. Install elbow/filter (13) and drain hose (12).
Figure 30
18
20
19
17
13
12
9
21
7
1617
15
14
16
15
5
14
17
17
3
22