BRAKES DO NOT STOP EFFECTIVELY (cont) - TM-9-2350-292-20-1

BRAKES DO NOT STOP EFFECTIVELY (cont) - TM-9-2350-292-20-1_201

BRAKES DO NOT STOP EFFECTIVELY (cont) - TM-9-2350-292-20-1_203

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
158

TM 9--2350--292--20--1 0036 00--3 BRAKES DO NOT STOP EFFECTIVELY -- CONTINUED 0036 00 Does the brake modulating valve plunger move in and out as the brake pedal is moved? F no yes Replace brake pedal assem- bly (WP 0377 00). Verify fault is corrected. Does the test gauge indicate 1100 psi or greater? 1. Turn MASTER switch OFF (TM 9--2350--292--10). 2. Release and pump brake pedal 4 or 5 times. 3. Check brake pressure gauge for indication of zero. 4. Disconnect hydraulic hose from brake cylinder adapter. 5. Connect removed hydraulic hose to 0--4000 psi test gauge (item 82, WP 0717 00). 6. Turn MASTER switch ON (TM 9--2350--292--10). 7. Press and hold down the brake pedal. G no yes CONTINUED ON NEXT PAGE CONTINUED FROM STEP E Press and release brake pedal while observing the underside of the brake pedal assembly. Replace brake modula- tion valve (WP 0376 00) or WP 0377 00). Verify fault is corrected. Replace hydraulic cylinder (WP 0370 00) or WP 0371 00). Verify fault is corrected.

Privacy Statement
Press Release
Contact