TM 9--2350--292--20--1
0036 00--8
BRAKES DO NOT STOP EFFECTIVELY -- CONTINUED
0036 00
CONTINUED FROM STEP N
Is 24 V dc present?
1. Disconnect harness 4W100 lead 48 from
bulkhead side of 80--amp circuit breaker.
2. Turn MASTER switch ON
(TM 9--2350--292--10).
3. Place multimeter red lead on harness
4W100 lead 48 bulkhead side circuit breaker
connector and black lead to ground. Check
for voltage.
4. Turn MASTER switch OFF
(TM 9--2350--292--10).
5. Reconnect harness 4W110 P1 at brake
pump motor.
R
no
yes
Replace circuit breaker
(WP 0263 00). Verify
fault is corrected.
Repair (WP 0290 00) or
replace (WP 0314 00)
harness 4W100. Verify
fault is corrected.
END OF TASK
